-
heat transfer adhesive special for waterproof fabric
hot melt adhesive glue for waterproof fabric
1, Properties:
Screen printable adhesive, fastness, excellent wash resistance up to 60℃.
2, Applications:
Suitable for most waterproof fabric,. Typically used for tagless label and litho back-up transfer printing.
3, Operating instructions:
100-160 mesh count/inch. Forced dry at 80℃ in 1-2 hours. The temperature and time for drying can be adjusted according to workshop and ink thickness, subject to the actual drying result.
4, Fusing conditions：
Glue-line temperature: 140°C-150°C
Pressure 5-10N/cm²
Time 10-15s -
cold peel matt heat transfer PET film
Cold peel matt release film/transfer PET
Introduction
1. product name: matt cold peel release film/transfer PET
2. Product model: PET83
3. Product specification: 48*64cm, 39*54cm, 1500pcs/ctn; Roll:
Thickness: 75µm, 100µm (Special specifications can be customized)
4. Product features: matt and cool peel release film, the heat transfer temperature is between 130-170°C( mainly depends on transfer adhesive). Transfer completely without residual ink. Because of the back coating the silicone layer, It can prevent the adhesion failure of products from long distance transportation and pressure. The isolation of paper and transportation costs can be saved. With multi-layer precision coating, no matter fine line or color printing can achieve the ideal effect.Application manual:
1. Apply to printing: suitable for the matte and cool peel of screen printing products.
2. Applicable heat transfer materials: solvent-based, water-based ink+solvent-based adhesive, water-based transfer adhesive
3. Peeling method: cold peeling -
solvent-based silk screen heat transfer adhesive
ST121 solvent-based transfer adhesive
1, Properties:
Screen printable adhesive, fastness, excellent wash resistance up to 60℃ 50cycles.
2, Applications:
Suitable for most waterproof fabric,. Typically used for tagless label and litho back-up transfer printing.
3, Operating instructions:
60-300 mesh count/inch. Forced dry at 80℃ in 1-2 hours. The temperature and time for drying can be adjusted according to workshop and ink thickness, subject to the actual drying result.
4, Fusing conditions：
Glue-line temperature: 130°C-150°C
Pressure 5-10N/cm²
Time 10-15s
-
high stretch plastisol tranfer ink
1,Introductions
PI-H series is a range of maximum opacity plastisol inks designed for heat transfer printing and for direct printing on most natural and synthetic fabric( ribbon printing, logo printing, gloves printing, socks printing, etc). With good adhesion, washability, colorfull, soft and comfortable hand-feel, ECO-friendly and safe, high glossy effect.
2,Properties
Formulated on non-phthalate plasticisers.
Unlimited screen stability.
Excellent wash resistance.
Excellent opacity
Soft gel-easy to handle- on and off screen.
-
high stretch solvent-based transfer ink
ST-H series solvent-based transfer screen ink
1, Properties:
Screen printable ink, easy to print, super elastic, wash resistance up to 60℃.
2, Applications:
Suitable for most common, polyester, nylon, spandex and blend fabric, such as T-shirts, sportswear, hats, etc. Typically used for tagless label and litho back-up transfer printing.
3, Operating instructions:
60-300 mesh count/inch, by solvent evaporation and air dry in 30-60 minutes, or forced dry at 80℃ in 20-30 minutes. The temperature and time for drying can be adjusted according to workshop and ink thinckness, subject to the actual drying result.
4, color range:
White, Clear, black, 10 Base colors, 7 Fluorescent colors, Metallics, refer to color guide. -
high stretch water-based transfer ink
TB water-based ink
1, Properties:
Screen printable ink, Eco-friendly, Low odor, Transfer are soft handle and high elastic, Wash resistance up to 60℃, Superior wet/dry rub resistance.
2, Applications:
Suitable for most common, polyester, nylon, spandex and blend fabric, such as T-shirts, sportswear, underwear, etc. Typically used for tagless label and litho back-up transfer printing.
3, Operating instructions:
60-300 mesh count/inch. Forced dry at 80℃ in 30-60 minutes. The temperature and time for drying can be adjusted according to workshop and ink thickness, subject to the actual drying result.
4, Colors range:
White, Clear, black, 10 Base colors, 7 Fluorescent colors, Metallics, refer to color guide. -
solvent-based transfer adhesive
ST121 solvent-based transfer adhesive
1, Properties:
Screen printable adhesive, fastness, excellent wash resistance up to 60℃ 50cycles.
2, Applications:
Suitable for most waterproof fabric,. Typically used for tagless label and litho back-up transfer printing.
3, Operating instructions:
60-300 mesh count/inch. Forced dry at 80℃ in 1-2 hours. The temperature and time for drying can be adjusted according to workshop and ink thickness, subject to the actual drying result.
4, Fusing conditions：
Glue-line temperature: 130°C-150°C
Pressure 5-10N/cm²
Time 10-15s
-
water-based transfer adhesive
Properties:
Eco-friendly , Low odor.
Formulated on non-PVC containing resins and non-phthalate plasticisers.
Super screen stability,
Excellent wash resistance, up to 60 degree
Soft handle-transfers are comfortable to wear.
-
cold peel glossy release film
Cold peel glossy release film/transfer PET
Introduction
1. product name: cold peel glossy release film/transfer PET
2. Product model: PET61
3. Product specification: 48*64cm, 39*54cm, 1500pcs/ctn; Roll:
Thickness: 75µm, 100µm (Special specifications can be customized)
4. Product features: glossy and cool peel release film, the heat transfer temperature is between 130-160°C( mainly depends on transfer adhesive). Transfer completely without residual ink. Because of the back coating the silicone layer, It can prevent the adhesion failure of products from long distance transportation and pressure. The isolation of paper and transportation costs can be saved. With multi-layer precision coating, no matter fine line or color printing can achieve the ideal effect.Application manual:
1. Apply to printing: suitable for the glossy and cool peel of screen printing products.
2. Applicable heat transfer materials: solvent-based water-based ink&adhesive,
3. Peeling method: cold peeling -
hot peel plain release film
hot peel plain release film/transfer PET
Introduction
- product name: hot peel plain release film/transfer PET
- Product model: PET91
- Product specification: 48*64cm, 39*54cm, 1500pcs/ctn; Roll:
Thickness: 75µm, 100µm (Special specifications can be customized)
-
Matt cold release film（special for litho transfer）
1. product name: matt cold peel release film/for litho transfer
2. Product model: PET21
3. Product specification:48*64cm,39*54cm, 500pcs/bag, 3 bags/ctn
Thickness: 75um, 100um(Special specifications can be customized) -
transfer PET film for plastisol ink with hot melt powder
Cold peel matt release film/transfer PET(special for plastisol ink with hotmelt powder)
Introduction
1. product name: matt cold peel release film/transfer PET
2. Product model: PET82
3. Product specification: 48*64cm, 39*54cm, 1500pcs/ctn; Roll:
Thickness: 75µm, 100µm (Special specifications can be customized)
4. Product features: matt and cool peel release film, the heat transfer temperature is between 130-170°C( mainly depends on transfer adhesive). Transfer completely without residual ink. Because of the back coating the silicone layer, It can prevent the adhesion failure of products from long distance transportation and pressure. The isolation of paper and transportation costs can be saved. With multi-layer precision coating, no matter fine line or color printing can achieve the ideal effect.Application manual:
1. Apply to printing: suitable for the matte and cool peel of screen printing products.
2. Applicable heat transfer materials: plastisol ink, +hotmelt powder
3. Peeling method: cold peeling
Latest New:
